Battery Manufacturing Engineering San Jose, California, United States

Company: Tbwa Chiat/Day Inc
Location: San Jose
Posted on: February 8, 2025

Job Description:

Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers while producing minimal noise. Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members. What You'll Do:

• Assist with the design of the High Voltage Battery production system, including line layout, manufacturing processes and automation, installation, and overall battery production ramp planning for a new manufacturing facility
• Apply expert level knowledge of High Voltage Batteries and manufacturing process to collaborate and influence our multidisciplinary Product Design Engineering, Quality, Manufacturing and Facilities teams in the development of a new High Voltage Battery for an eVTOL aircraft
• Drive the Design for Manufacturability efforts with the product design team
• Determine the requirements for automation, tools, stands, fixtures, etc.
• Develop the manufacturing Build Plan (line layout, manufacturing methods, part flow, tools, equipment, precedence network, etc.) and determine an appropriate MBOM
• Conduct process failure mode and analysis (PFMEA) for the Battery production system
• Develop specification for tooling and automation equipment
• Develop efficient manufacturing processes
• Oversee Final Acceptance Testing of manufacturing equipment
• Create/approve work instructions for Battery assembly and installation
• Support first unit builds and testing of the production systemWhat You Need:
  • Bachelor's degree in Electrical Engineering, Manufacturing Engineering, Mechanical Engineering, or equivalent
  • 1+ years work experience, EV or aerospace preferred
  • Excellent communication and interpersonal skills
  • Effective organizational and time management skills
  • Efficient documentation and written communication
  • Self-motivated with the ability to work independently or as part of a team
  • Ability to work in a fast paced and highly regulated environment with adaptability to changing priorities
  • Direct hands on build experience with mechanical and electronic assemblies using sophisticated manufacturing equipment
  • Demonstrated experience in statistical process control and GD&T
  • Experience developing production lines from prototype to mass production
  • Strong organizational skills
  • Experience with CAD, PLM, MES, and ERP softwareBonus Qualifications:
    • Hands-on experience with battery module and/or pack manufacturing
    • Experience with wirebonding, laser welding, ultrasonic welding, electronic torque tools, adhesive dispense, and/or battery End Of Line test
    • Direct experience programming and troubleshooting industrial automation (PLC, robots, gantries, etc---)
    • Ability to travel 10% of the time
    • EV/eVTOL knowledge or experience
    • Experience with high voltage wiring, batteries, and electric motor
    • Aircraft configuration management and conformity experiencePlease note that this job description is intended to provide a general overview of the position and does not include an exhaustive list of responsibilities and qualifications.At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company's business strategy. For this position we are targeting a base pay between $110,400 - $138,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience Information collected and processed as part of any job applications you choose to submit is subject to Archer's Candidate Privacy Policy . Archer is unable to provide work visa sponsorship for this position at the present time. Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws. Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out toPeople@archer.com . All employment processes are managed by the Archer People Team. Apply for this job*indicates a required field First Name * Last Name * Email * Phone * Location (City) * Resume/CV * Enter manually Accepted file types: pdf, doc, docx, txt, rtf Enter manually Accepted file types: pdf, doc, docx, txt, rtf LinkedIn Profile Website What are your base ($USD) expectations? * Are you legally authorized to work in the United States? * Select... Will you now, or in the future require sponsorship for employment? (i.e.: F1, H-1B, E2, etc.) * Select... In accordance with state and local regulations, Archer's offices are open. Consistent with company policy, employees are expected to report to work onsite at our offices. Are you open to relocating to our corporate headquarters in San Jose, CA? * Select... Were you referred to Archer by a current employee? * Select... If you were referred, please provide the name of the employee. * Voluntary Self-IdentificationFor government reporting purposes, we ask candidates to respond to the below self-identification survey.Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiringprocess or thereafter. Any information that you do provide will be recorded and maintained in aconfidential file.As set forth in Archer's Equal Employment Opportunity policy,we do not discriminate on the basis of any protected group status under any applicable law.If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection.As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measurethe effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categoriesis as follows:A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985. Select... Voluntary Self-Identification of Disability Form CC-305 Page 1 of 1 OMB Control Number 1250-0005 Expires 04/30/2026 Voluntary Self-Identification of Disability Form CC-305 Page 1 of 1 OMB Control Number 1250-0005 Expires 04/30/2026
      Why are you being asked to complete this form?We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor's Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp .How do you know if you have a disability?A disability is a condition that substantially limits one or more of your "major life activities." If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:
      • Alcohol or other substance use disorder (not currently using drugs illegally)
      • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
      • Blind or low vision
      • Cancer (past or present)
      • Cardiovascular or heart disease
      • Celiac disease
      • Cerebral palsy
      • Deaf or serious difficulty hearing
      • Diabetes
      • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
      • Epilepsy or other seizure disorder
      • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
      • Intellectual or developmental disability
      • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
      • Missing limbs or partially missing limbs
      • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
      • Nervous system condition, for example, migraine headaches, Parkinson's disease, multiple sclerosis (MS)
      • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
      • Partial or complete paralysis (any cause)
      • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
      • Short stature (dwarfism)
      • Traumatic brain injury Disability Status Select... PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.
        #J-18808-Ljbffr

Keywords: Tbwa Chiat/Day Inc, San Jose , Battery Manufacturing Engineering San Jose, California, United States, Engineering , San Jose, California